TandyPro® Burnishing Machine

Take your edges to the next level! Get beautiful, professional results every time with this versatile, variable-speed machine. Use the included sanding sleeves to shave and shape edges, then burnish them to a slick finish with the included cocobolo wheel. This quality-constructed machine will give you years of service while saving you hours of work time.

Specifications

• Dimensions: 15 x 10 x 32 in. (38.1 x 25.4 x 81.28 cm)
• Machine Weight: 31 lbs. (14.06 kg)
• Stand Weight: 29 lbs. (13.15 kg)

Features

• Variable Speed (2,000- 3,450 RPM)
• 3/4 Horsepower Reversible Motor
• 3-year Motor Warranty
• Enhanced Stand
• Cocobolo Wheel
• Rubber Wheel
• Sanding Sleeve (80-Grit)
• Sanding Sleeve (120-Grit)

Instructions

1. Make sure that your Burnisher’s speed setting is on low before turning the machine on.
2. Turn the Burnisher on and twist the speed knob to the desired speed, sanding should be performed at a higher speed than burnishing
3. Always pull the leather opposite of the direction of spin.
4. Once all sides of the leather are sanded, turn the machine off.
5. Using your edge beveller, bevel the corners of the leather on both the flesh and grain side.
6. Apply a thin layer of burnishing solution to the edges of the leather.
7. Turn the machine on once more and turn the knob to a slower speed. Pulling away from the direction of spin, slick your edges.
8. If you would like to switch the direction of spin, flip the switch on the back of the machine.