A beautifully finished leather edge is one of the hallmarks of professional leathercraft. Whether you’re making belts, wallets, or bags, the way you treat your edges can elevate your project from homemade to high-end. In this guide, we’ll cover the three essential steps of edge finishing: beveling, burnishing, and polishing—and how to do them for a flawless result.

Why Edge Finishing Matters

Raw, cut edges of leather can look rough and are more prone to fraying or wearing down. Finishing your edges not only makes your piece look polished but also increases its durability. Taking the time to bevel, burnish, and polish ensures smooth edges that feel good in the hand and hold up over time.

Step 1: Beveling Leather Edges

Beveling is the process of shaving off the sharp corners of a leather edge with an edge beveler tool. This creates a rounded, smooth surface that’s easier to finish.

How to bevel edges:

1. Secure your project on a cutting mat or stitching pony.

2. Hold the edge beveler at a consistent angle along the edge.

3. Pull it firmly and smoothly in one motion to shave off the corner.

4. Repeat on the opposite side for a balanced look.

Pro Tip: Always bevel before dyeing or burnishing for the cleanest finish.

Step 2: Burnishing Leather Edges

Burnishing is where the magic happens. This process uses friction to compress and smooth the leather fibers, creating a sealed, glossy edge.

Popular burnishing methods:

• Hand burnishing with a slicker: Rub the edge with a wooden or plastic slicker after applying water, gum tragacanth, or Tokonole.

• Canvas burnishing: Wrap canvas cloth around the edge and rub for extra heat and smoothness.

• Machine burnishing: Use a powered burnishing wheel for faster results on large projects.

Pro Tip: Start with light pressure and increase as the edge begins to shine—too much force early on can cause rough spots.

Step 3: Polishing Leather Edges

Once burnished, polishing takes your edge from smooth to professional-grade. This step adds sheen and protects the leather.

Ways to polish leather edges:

• Apply edge paint or edge dressing for a uniform, colored finish.

• Use beeswax for a natural, sealed surface.

• Buff with a soft cloth or canvas until the edge gleams.

Common Mistakes to Avoid

• Skipping beveling: Leaves edges sharp and harder to burnish.

• Over-wetting the edge: Can weaken fibers and prevent proper sealing.

• Using dull tools: Causes tearing instead of clean shaving or burnishing.

Final Thoughts

Mastering your leather edges with beveling, burnishing, and polishing makes all the difference in the look and durability of your projects. With practice, these finishing steps will become second nature—giving your leatherwork the professional, polished edge it deserves.